Pro Tools Manual Tube and Pipe Bender 105 Series

$489.95

Current Lead time: 2-3 Weeks

  • Great for custom fabrication applications

  • Bend up to 2", 0.134" tubing or NPS 1-1/2 pipe manually!

  • 100% Designed, Machined, and Assembled in the USA!

  • Designed for a lifetime of constant use

  • Forms quality, repeatable bends (less than 10% distortion in most cases)

  • Creates 180-degree bends in less than 2 minutes (requires appropriate die)

  • Tooling changes in less than 30 seconds

  • All parts are CNC-machined for accuracy

  • Heavy-duty 5/8”-thick frame arms

  • Converts to hydraulic in minutes with optional upgrade kit

  • Does Not Include Dies, Handle, or Pedestal Stand

Current Lead time: 2-3 Weeks

  • Great for custom fabrication applications

  • Bend up to 2", 0.134" tubing or NPS 1-1/2 pipe manually!

  • 100% Designed, Machined, and Assembled in the USA!

  • Designed for a lifetime of constant use

  • Forms quality, repeatable bends (less than 10% distortion in most cases)

  • Creates 180-degree bends in less than 2 minutes (requires appropriate die)

  • Tooling changes in less than 30 seconds

  • All parts are CNC-machined for accuracy

  • Heavy-duty 5/8”-thick frame arms

  • Converts to hydraulic in minutes with optional upgrade kit

  • Does Not Include Dies, Handle, or Pedestal Stand

  • Round Tube

    Minimum Outside Diameter (OD): 1/2" (12.7 mm)

    Maximum Outside Diamter (OD): 2" (50.8 mm)

    Minimum Wall Thickness: Depends on Die (See Die Charts)

    Maximum Wall Thickness: 0.134"

    Pipe

    Minimum Size: NPS 1/4 (DN 8)

    Maximum Size: NPS 1-1/2 (DN 35)

    Note: Our benders are rated for bending mild steel Schedule 40 Pipe. For other materials or Schedules, contact for details.

    Square Tube

    Minimum Size: 1/2" (12.7 mm)

    Maximum Size: 1-1/2" (38.1 mm)

    Minimum Wall Thickness: 0.065" (1.7 mm)

    Maximum Wall Thickness: 0.125" (3.2 mm)

    Other Specifications

    Minimum Centerline Radius (CLR): Approx. 3 x OD (See Die Charts for details.)

    Maximum Centerline Radius (CLR): 7" (177.8 mm)

    Maximum Degree of Bend: 180 degrees, depending on the die

    • 105 Heavy Duty Tube and Pipe Bender

    • Economy Degree Plate with Pointer

    • U-Strap Pin, Center-Axis Pin, Backing Block Pin, Large Swing Arm Pin, Ratchet Handle Pin, & Small Swing Arm Pin

    • Tensioning Bolt

You Might Also Like